ER Collet Systems And Holders

ER Collet Systems And Holders

  1. ER Collets
    ‣ REGO-FIX the original Swiss ER tool holding collets
    ‣ Best accuracy compared to other brands
    ‣ Standard Precision TIR .00039", Ultra Precision TIR .00019
    ‣ Wide Range of sizes available from stock


    Learn More & Buy
  2. Collet Sleeves
    ‣ GenSwiss Signature Series ER Collet Sleeves
    ‣ Highly Accurate and designed specifically for Swiss Type Machines
    ‣ Precision Ground and through hardened for accuracy and long life
    ‣ Wide Range of sizes and optional Thru Coolant available


    Learn More & Buy
  3. Quick Change Collet Systems
    ‣ Quick Change Collet System to reduce setup time
    ‣ Enables Pre-Setting of tools for faster change over
    ‣ Solid ER Collet bore for use with all standard boring bars
    ‣ Easily locates standard boring bars in radial and axial positions


    Learn More & Buy
  4. Ti-Loc
    ‣ GenSwiss Ti-Loc End Mill Extensions for improved reach and accuracy
    ‣ Enables Micro tools to clear the guide bushing and spindle nut
    ‣ Maintains exceptional TIR less than .0002" at 1" away from the collet nose
    ‣ Solves deflection and chatter issues and extends tool life


    Learn More & Buy
  5. EZR
    ‣ EZR Swiss Clamp System
    ‣ Eliminates wrench slippage
    ‣ Prevents accidental tool breakage and operator injuries
    ‣ Eliminates the possibility of dropping nut into the machine


    Learn More & Buy
  6. ER Collet System Accessories
    ‣ ER accessories such as nuts, wrenches, coolant seals, and bushings


    Learn More & Buy
Related Products
ET1-12150AL:         ER11 Special Long Tapping Collet for shank Ø1.5mmw, w/Locking Screw in Front

ET1-12150AL: ER11 Special Long Tapping Collet for shank Ø1.5mmw, w/Locking Screw in Front

Learn More & Buy
SAT-20-6.00-095180:            Arbor, Tiloc ® UP      Ø6.0 x 1.0mm Hub, ER20 Shank, Flange Ø9.5x18m

SAT-20-6.00-095180: Arbor, Tiloc ® UP Ø6.0 x 1.0mm Hub, ER20 Shank, Flange Ø9.5x18m

Learn More & Buy
CS-16-254-130:     ER16 Collet Sleeve Ø1.0 x5.12'' Shank w/Flat, Thru w/Stop, Mini-Nut

CS-16-254-130: ER16 Collet Sleeve Ø1.0 x5.12'' Shank w/Flat, Thru w/Stop, Mini-Nut

Learn More & Buy
ET1-20700:             ER20 Tapping Collet for Ø7.00mm shank

ET1-20700: ER20 Tapping Collet for Ø7.00mm shank

Learn More & Buy
CW-04621: ER11 - Mini Wrench

CW-04621: ER11 - Mini Wrench

Learn More & Buy
CC-ER20-10.0:        RegoFix ER 20 10.00mm Collet, Range 9.0-10.0

CC-ER20-10.0: RegoFix ER 20 10.00mm Collet, Range 9.0-10.0

Learn More & Buy
CQS-SH20-37501:  ER20 w/ 3/8'' Bore Boring Adaptor w/ M24 x 1.0mm Nut and Locator Pin

CQS-SH20-37501: ER20 w/ 3/8'' Bore Boring Adaptor w/ M24 x 1.0mm Nut and Locator Pin

Learn More & Buy
CC-ER20i-3/8 UP:    RegoFix ER 20 3/8"  Collet, Range .335-.375

CC-ER20i-3/8 UP: RegoFix ER 20 3/8" Collet, Range .335-.375

Learn More & Buy
MRH 2500 2040

MRH 2500 2040

Learn More & Buy
ET1-32168:             ER32 Tapping Collet for Ø.168" (4.26) shank

ET1-32168: ER32 Tapping Collet for Ø.168" (4.26) shank

Learn More & Buy