1602-1.0-5 FLV GT20 UHM20 TX+
0
- GSI Part
- 7005-211180
- Series
- CUT1600
- Operation/Geometry
- Cut-Off
- Chip Breaker
- GT20 Chip Breaker
- Execution
- Left Handed Inverted Cut
- Grade / Coating
- UHM20 TX+
- Depth Of Cut (c)
- 5 mm
- Width Of Cut (a)
- 1 mm
- Nose Radius (r)
- 0.05 mm
- Clearance (α)
- 7°
- Edge Sharpness
- Sharp Cutting Edge
CUT1602 GT20 Cut-Off Inserts
With Type-GT20 Chip Control
multidec® 1602 GT20 turning inserts are designed for cut-off operations on Swiss-type CNC machines. Perfectly designed for the smallest of Swiss machines the 1600 series excels at work under .125in diameter. Tough carbides combined with a variety of coatings enhances tool life in tough materials typically machined in Swiss-type applications.
- Cut-off operations
- .8mm to 1.5mm (.0315in to .0591in) insert widths
- Type-GT20 chip control: Compared to the GS12 Chip Control geometry, the GT20 Chip Control has a sharp and slightly rounded cutting edge. It provides excellent chip flow, creating short chips and resulting in a smooth finish. These results can be experienced at higher feed rates also.
NOTE: Not recommended for use in plastics and titanium due to lower tool life in these materials. Check speeds and feeds for proper usage.