Tool Holding
Collet Sleeves
GenSwiss Collet Sleeves are designed for optimum use on Swiss Type machine applications. They provide rigid & accurate holding of ID tooling. GenSwiss collet sleeves feature ground shanks and tapers. Mini nuts are used to reduce interference and to make setup and tool changing easier than collet sleeves with hexagonal clamping nuts.
orientation for use with boring bars.
71 products
ER Collets
REGO-FIX® ER Collets are world renown for their precision accuracy, quality and durability. Featuring the industry standard lowest T.I.R. available, REGO-FIX® ER Collets provide superior tool life while delivering the greater accuracy that Swiss-type machinists demand.
272 products
Floating Tap Collets
PCM floating tapping collets are an economical solution to replace expensive tapping sleeves and eliminate tapping error. Ideal for use on machines that do not have a rigid tapping function. The ET1 floating tap collets can also be used with rigid tapping function to compensate for pitch error due to the torsional stress that can occur on small taps eliminating the difference between the tap and the CNC.
67 products
ER Nuts
33 products
Coolant Disks
28 products
RegoFix SwissQuick
2 products
CQS Quick Change System
The GenQuick tooling system helps new users as well as seasoned veterans achieve faster setups and tool changes through the use of tool holder adaptors and quick-change modules that can be preset and are based on the ER standard tool holding system. These collet sleeves are cost effective solutions to tool holding and are available in a variety of both inch and metric sized shank diameters, and feature a solid shank for rigidity and a side coolant port for connection to a high-pressure coolant delivery system. Every unit has a notched collet taper for easy tool orientation when combined with quick change boring bar adapters.
EZR Swiss Clamp System
Upgrade your current tool holders with "EzR Swiss Clamp". ER Collet clamping nuts from GenSwiss.
CHK Collets
65 products
Hydraulic
GenSwiss hydraulic clamping system are perfect for micro tools, extending tool life with vibration dampening and exceptional TIRs down to .00004in. An array of coolant-thru reduction sleeves further increases the compatability of this rigid holding system by allowing tool shank sizes down to 3mm.
126 products
Reduction Sleeves
Precision Reduction Sleeves are an inexpensive alternative to purchasing additional collet holders tooling.
22 products
Coolant Wedges
58 products
Quick Change Adaptors
1 products
GenBore
The GenBore-mini is an excellent solution for when you need to incorporate additional small ID tools into your setup. Low profile and interference-free in most Swiss machines, the GenBore-mini is ideal for small ID spotting, drilling, and boring.
3 products
Collet Reducers
Based on the popular Ti-Loc Mill Extension for round shank tools, this taper-integrated collet reducer is designed to work with virtually any ER8 collet and tool holder that employs ER16 collets.
1 products
