PCM

CIT-LSW101-U09.1: Whirling Spindle For L20/M20/32 Gang Rack, Reduced RPM, I/O= 2/1, Ang Adj 10

CIT-LSW101-U09.1: Whirling Spindle For L20/M20/32 Gang Rack, Reduced RPM, I/O= 2/1, Ang Adj 10PCM$28,400.00

Compare

CIT-LSW101-U12.1: Whirling Spindle For L20/M20/32 Gang Rack, Reduced RPM, I/O= 2/1, Ang Adj 10

CIT-LSW101-U12.1: Whirling Spindle For L20/M20/32 Gang Rack, Reduced RPM, I/O= 2/1, Ang Adj 10PCM$28,500.00

Compare

CIT-MSW101-U09.1: Whirling Spindle For M12/16 Turret RPM Reduced, I/O= 2/1, Angle Adj 10PCM$16,200.00

Compare

CIT-MSW101-U12.1: Whirling Spindle For M12/16 Turret RPM Reduced, I/O= 2/1, Angle Adj 10PCM$16,300.00

Compare

CIT-CDF401-HP: ID 2 Pos Holder √ò1" Bores, M20/32,73mm Drill Depth,Ext Coolant,Int 1st Pos 150BarPCM$2,560.00

Compare

CIT-VTF1510: OD 2 Position Holder For M12/16, 10mm Sq. For Y-Axis Turret, Ext. Coolant 150 Bar MaxPCM$2,070.00

Compare

CIT-GSE-2507-2x: 90¬∞ 2X Accel Spdl Drill/Mill Dbl End K12E/K16E, ER11, i/o 1:2, Pos T12-14 Top PosPCM$16,580.00

Compare

CIT-GDF903: ID 2 Position Dog Leg Tool Holder √ò1" Bores For A20/A32/D25/L32/L220/M32, T06-T09PCM$2,570.00

Compare

CIT-MSP-106: Milling Spindle For M12/16, √ò13mm Arbor, i/o 1:1, For Turret, Cutter √ò50mm x 15 MaxPCM$14,320.00

Compare