3005-2.0-8 ER GC20 R15 UHM20
- GSI Part
- 7005-211044
- Series
- CUT3000
- Operation/Geometry
- Groove and Turn
- Chip Breaker
- GC20 Chip Breaker
- Execution
- Right Handed Standard Cut
- Grade / Coating
- UHM20 Uncoated
- Depth Of Cut (c)
- 8 mm
- Width Of Cut (a)
- 2 mm
- Nose Radius (r)
- 0.15 mm
- Max Grooving Depth (d)
- 5 mm
- Edge Sharpness
- Honed
Swiss Made UTILIS World Class tools deliver proven production performance and extended tool life. All 3000 series inserts feature a wide variety of chip breaker geometries and will fit the same holder, reducing tooling costs. The unique insert holding design absorbs machining forces providing one of the most rigid Swiss-turning systems available to the industry today.
Type-GC20 Chip Breaker
Groove & Turn Inserts
Providing good results in almost any material while facing, grooving, or turning, the GC20 chip breaker can turn in three direction with at extremely low and high cutting depths and across low and high feed rates. Excellent chip control results can also be observed in lead-free brass.
NOTE: Not recomended for use in plastics and titanium due to lower tool life in these materials. Check speeds and feeds for proper usage.