3002-1.5-10 ERN GT20 UHM20 HPX

Login Required
0
We don't have this product in stock now, items will be replenished soon and can still be ordered but will have a delivery delay.
GSI Part
7005-152952
Series
CUT3000
Operation/Geometry
Cut-Off
Chip Breaker
GT20 Chip Breaker
Execution
Right Handed Neutral Cut
Grade / Coating
UHM20 HPX
Depth Of Cut (c)
10 mm
Width Of Cut (a)
1.5 mm
Nose Radius (r)
0.15 mm
Edge Sharpness
Honed

Swiss Made UTILIS World Class tools deliver proven production performance and extended tool life. All 3000 series inserts feature a wide variety of chip breaker geometries and will fit the same holder, reducing tooling costs. The unique insert holding design absorbs machining forces providing one of the most rigid Swiss-turning systems available to the industry today.


Type-GT20 Chip Breaker
Cut-Off Inserts

Compared to the GS12 chip breaker geometry, the GT20 chip breaker has a sharp and slightly rounded cutting edge. It provides excellent chip flow, creating short chips and resulting in a smooth finish. These results can be experienced at higher feed rates also.
NOTE: Not recomended for use in plastics and titanium due to lower tool life in these materials. Check speeds and feeds for proper usage.