3002-1.0-10 ERN GT20 UHM20 HPX
- GSI Part
- 7005-211239
- Series
- CUT3000
- Operation/Geometry
- Cut-Off
- Chip Breaker
- GT20 Chip Breaker
- Execution
- Right Handed Neutral Cut
- Grade / Coating
- UHM20 HPX
- Depth Of Cut (c)
- 10 mm
- Width Of Cut (a)
- 1 mm
- Nose Radius (r)
- 0.05 mm
- Edge Sharpness
- Honed
Swiss Made UTILIS World Class tools deliver proven production performance and extended tool life. All 3000 series inserts feature a wide variety of chip breaker geometries and will fit the same holder, reducing tooling costs. The unique insert holding design absorbs machining forces providing one of the most rigid Swiss-turning systems available to the industry today.
Type-GT20 Chip Breaker
Cut-Off Inserts
Compared to the GS12 chip breaker geometry, the GT20 chip breaker has a sharp and slightly rounded cutting edge. It provides excellent chip flow, creating short chips and resulting in a smooth finish. These results can be experienced at higher feed rates also.
NOTE: Not recomended for use in plastics and titanium due to lower tool life in these materials. Check speeds and feeds for proper usage.